ISSN print edition: 0366-6352
ISSN electronic edition: 1336-9075
Registr. No.: MK SR 9/7

Published monthly
 

Performance of new designed anchor impellers in stirred tanks

Youcef Kamla, Houari Ameur, Abdelkader Karas, and Mohammed Ilies Arab

Faculty of Science and Technology, Hassiba Ben Bouali University of Chlef, Ouled Fares, Algeria

 

E-mail: y.kamla@univ-chlef.dz

Received: 23 April 2019  Accepted: 12 August 2019

Abstract:

Mixing with mechanically stirred tanks is a process extensively used in different industrial processes, the choice of the mixing system changes with the application (homogenization, heat transfer, dispersion of a gaseous phase in a liquid, emulsion, etc.). The flow topology strongly depends on geometrical configurations and the fluid characteristics. In this study, we used Ansys CFX 18.0 to investigate the effects of the anchor geometry, the number of blades and their inclination inside a stirred tank for low Reynolds numbers varying from 0.1 to 60. The obtained results revealed a good enhancement of fluid flows in the vessel volume with the new suggested design. Increasing the number of blades with inclination was found to be efficient to improve the mixing characteristics. Also, the comparison between the rectangular, octagonal and circular shapes of blades revealed that the octagonal shape (A-8b) yields the widest well-stirred region over the other cases, but the lowest power consumption is achieved with circular shape of blades.

Keywords: Stirred tank; Anchor impeller; Flow patterns; Power consumption

Full paper is available at www.springerlink.com.

DOI: 10.1007/s11696-019-00902-x

 

Chemical Papers 74 (3) 779–785 (2020)

Friday, March 29, 2024

IMPACT FACTOR 2021
2.146
SCImago Journal Rank 2021
0.365
SEARCH
Advanced
VOLUMES
European Symposium on Analytical Spectrometry ESAS 2022
© 2024 Chemical Papers