|
|
ISSN print edition: 0366-6352
ISSN electronic edition: 1336-9075
Registr. No.: MK SR 9/7
Published monthly
|
Screen-printed conductive carbon layers for dye-sensitized solar cells and electrochemical detection of dopamine
Michal Hatala, Pavol Gemeiner, Lenka Lorencová, Milan Mikula, Matej Hvojnik, Michaela Pavličková, Aleš Ház, Daniel Kosnáč, Tomáš Bertók, and Ján Tkáč
Department of Graphic Arts Technology and Applied Photochemistry, Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava, Bratislava, Slovakia
E-mail: hatalamichal@gmail.com
Received: 24 November 2020 Accepted: 9 March 2021
Abstract: In the field of printed electronics, carbon and its allotropes are today among the most studied materials due to their unique physical and chemical properties. In this work, carbon dispersions were used for the preparation of screen-printed carbon electrodes applied as counter electrodes (CEs) for the dye-sensitized solar cells and as working electrodes for electrochemical sensing. Following the simple and quick homogenization process, carbon dispersions were subjected to thermogravimetric analysis to closely examine drying, eventually sintering processes after printing. The influence of the graphite:carbon black ratio was investigated. The structure of composite carbon layers was analyzed by scanning electron microscopy and optical microscopy. The DSSC CEs printed from the dispersion containing 100 wt% of CB exhibited the highest catalytic activity for the effective reduction of oxidized triiodide I3− back to iodide I− within the solar cell. The highest conversion efficiency achieved for the high-temperature processed CE was 3.05% with the fill factor of 0.65. The same composition of the carbon WE was used for the quantitative analysis of neurotransmitter dopamine. Based on the cyclic voltammetry measurements, the sensor showed a limit of detection of 13.3 nM for dopamine.
Keywords: Printed electronics; Carbon; Dye-sensitized solar cells; Electrochemical sensors
Full paper is available at www.springerlink.com.
DOI: 10.1007/s11696-021-01601-2
Chemical Papers 75 (8) 3817–3829 (2021)
|